Configuration and calibration

`pynetft.Config`

from pynetft import ConfigpyNetFT 2.1.0

class Config;

Fields

Name	Type	Default	Mutability
`sensor_host`	`str`	`'192.168.1.1'`	Read-only
`rdt_port`	`int`	`49152`	Read-only
`http_port`	`int`	`80`	Read-only
`receive_timeout`	`float`	`0.1`	Read-only
`configuration_connect_timeout`	`float`	`0.5`	Read-only
`configuration_timeout`	`float`	`1.0`	Read-only
`reconnect_initial_delay`	`float`	`0.25`	Read-only
`reconnect_max_delay`	`float`	`5.0`	Read-only
`sample_rate_limit_hz`	`float`	`0.0`	Read-only
`deliver_samples_with_error_status`	`bool`	`False`	Read-only
`recovery_policy`	`RecoveryPolicy`	`RecoveryPolicy.RECONNECT`	Read-only
`calibration_override`	`Calibration \| None`	`None`	Read-only

`pynetft.Calibration`

from pynetft import CalibrationpyNetFT 2.1.0

class Calibration;

Fields

Name	Type	Default	Mutability
`counts_per_force_unit`	`float`	Required	Read-only
`counts_per_torque_unit`	`float`	Required	Read-only
`force_unit`	`ForceUnit`	Required	Read-only
`torque_unit`	`TorqueUnit`	Required	Read-only

`pynetft.SensorConfiguration`

from pynetft import SensorConfigurationpyNetFT 2.1.0

class SensorConfiguration;

Fields

Name	Type	Default	Mutability
`product_name`	`str`	Required	Read-only
`calibration`	`Calibration`	Required	Read-only
`source`	`CalibrationSource`	Required	Read-only
`revision`	`int`	Required	Read-only

These dataclasses are immutable. Validation occurs when Config is passed to Client. A calibration override is complete: both scales must be finite and positive and both units must be known.